Warning
Mae'r hysbyseb swydd hon wedi dod i ben ac mae'r ceisiadau wedi cau.
Industrial Welder
| Dyddiad hysbysebu: | 05 Rhagfyr 2024 |
|---|---|
| Cyflog: | £23.04 i £27.00 yr awr |
| Oriau: | Llawn Amser |
| Dyddiad cau: | 04 Ionawr 2025 |
| Lleoliad: | Birmingham, West Midlands |
| Gweithio o bell: | Ar y safle yn unig |
| Cwmni: | Tay Recruitment |
| Math o swydd: | Dros dro |
| Cyfeirnod swydd: | KP/MT13 |
Crynodeb
TAY Recruitment are currently looking for an Industrial welder for a 1 month contract in West Bromwich.
The work is on a Waste plant and will involve TIG Welding
the rate of pay will be £27 CIS or £23.04 including holiday PAYE (PAYE breakdown below)
PAYE £20.56 + 12.07 % holiday pay at £2.48 = total £23.04
you will need a valid CSCS card and also the following qualifications
Welder Qualification Certificate Requirements-1
Standard: EN ISO 9606-1
Welding Process: 111-SMAW(MMA)-Electrode
Material: Carbon steel
Thickness range: ≥ 3 mm + Multi layer (can send similar certificates that range may vary)
Joint Type Qualification: Butt Weld (BW) and Fillet Weld (FW)
Welding Position: All position except PG
Welder Qualification Certificate Requirements-2
Standard: EN ISO 9606-1
Welding Process: 141-TIG/GTAW
Material: Carbon steel
Thickness range: ≥ 3 mm + Multi layer (can send similar certificates that range may vary)
Diameter range: Pipedia≥ 25 mm (can send similar certificates that range may vary)
Joint Type Qualification: Butt Weld (BW) and Fillet Weld (FW) (fillet weld is not mandatory for TIG welding)
Welding Position: All position except PG
The work is on a Waste plant and will involve TIG Welding
the rate of pay will be £27 CIS or £23.04 including holiday PAYE (PAYE breakdown below)
PAYE £20.56 + 12.07 % holiday pay at £2.48 = total £23.04
you will need a valid CSCS card and also the following qualifications
Welder Qualification Certificate Requirements-1
Standard: EN ISO 9606-1
Welding Process: 111-SMAW(MMA)-Electrode
Material: Carbon steel
Thickness range: ≥ 3 mm + Multi layer (can send similar certificates that range may vary)
Joint Type Qualification: Butt Weld (BW) and Fillet Weld (FW)
Welding Position: All position except PG
Welder Qualification Certificate Requirements-2
Standard: EN ISO 9606-1
Welding Process: 141-TIG/GTAW
Material: Carbon steel
Thickness range: ≥ 3 mm + Multi layer (can send similar certificates that range may vary)
Diameter range: Pipedia≥ 25 mm (can send similar certificates that range may vary)
Joint Type Qualification: Butt Weld (BW) and Fillet Weld (FW) (fillet weld is not mandatory for TIG welding)
Welding Position: All position except PG