Thermal Insulation Engineer (Industrial)
| Dyddiad hysbysebu: | 16 Mawrth 2026 |
|---|---|
| Cyflog: | £19.04 yr awr |
| Gwybodaeth ychwanegol am y cyflog: | TICA Engineering Rates 2026 for Thermal Insulation Engineer |
| Oriau: | Llawn Amser |
| Dyddiad cau: | 15 Ebrill 2026 |
| Lleoliad: | Norfolk, Eastern England |
| Gweithio o bell: | Ar y safle yn unig |
| Cwmni: | E&P Insulations Ltd |
| Math o swydd: | Parhaol |
| Cyfeirnod swydd: | JobRef4 |
Crynodeb
To apply insulation, insulating materials, metal and surface claddings and coatings to pipework, vessels, tanks, ductwork and associated equipment or other mechanical systems in order to control heat loss or gain, provide personnel protection, frost protection and maintain temperature. This also covers noise control or fire protection. Sites worked on are all industrial sites.
Measure and cut insulating materials for covering surfaces using measures, knives, scissors or machinery.
Remove or seal off old insulation, following Health & Safety Procedures.
Fit insulation around obstructions and shape insulating materials and protective coverings, as required.
Ability to interpret drawings and specifications to determine and fulfil project requirements.
Determine the amounts and types of insulation needed and methods of installation, based on factors such as location, surface shape and equipment.
Install sheet metal (and or other coverings, e.g PIB) around insulated pipes in order to protect the insulation from degradation due to physical damage or weather conditions.
Apply, remove and repair insulation, thermal and fire on industrial and domestic equipment, pipes, duct work or other mechanical systems (tanks, pipework etc) to help control noise and maintain temperatures.
Be able to select appropriate insulation, thermal and fire (mineral wool, fiberglass etc) based on the heat retaining OR excluding characteristics of the materials.
Ability to work with tools and machinery associated with this type of work.
Adhere to both local and site/Client driven Health & Safety policies and procedures.
Ensure that any Risk Assessment documentation is read in full and adhered to on site, understanding any risks and mitigations highlighted.
Ask questions if unsure and always check understanding if unsure.
Have the ability to work as part of a team or lone working
Have good time management skills
Have the ability to conduct themselves appropriately on site, as a representative of the company.
Essential
Able to travel. You will be required to work across different Client sites.
Proven and relevant work experience, with references required.
Ability to work at height / confined spaces. Training will be provided if needed.
Clean Driving Licence. You may be required to drive a Company Van.
Flexibility to work Overtime / Weekends when required
Happy to work either indoors or outdoors, dependant on the project.
Required to wear protective clothing and masks (PPE)
Desirable
TICA Skill Card
IPAF Operator Training MEWP - Mobile Vertical (3a) & Mobile Boom (3b)
Confined Spaces Training
PASMA – Certificate of Competence for Tower use
Measure and cut insulating materials for covering surfaces using measures, knives, scissors or machinery.
Remove or seal off old insulation, following Health & Safety Procedures.
Fit insulation around obstructions and shape insulating materials and protective coverings, as required.
Ability to interpret drawings and specifications to determine and fulfil project requirements.
Determine the amounts and types of insulation needed and methods of installation, based on factors such as location, surface shape and equipment.
Install sheet metal (and or other coverings, e.g PIB) around insulated pipes in order to protect the insulation from degradation due to physical damage or weather conditions.
Apply, remove and repair insulation, thermal and fire on industrial and domestic equipment, pipes, duct work or other mechanical systems (tanks, pipework etc) to help control noise and maintain temperatures.
Be able to select appropriate insulation, thermal and fire (mineral wool, fiberglass etc) based on the heat retaining OR excluding characteristics of the materials.
Ability to work with tools and machinery associated with this type of work.
Adhere to both local and site/Client driven Health & Safety policies and procedures.
Ensure that any Risk Assessment documentation is read in full and adhered to on site, understanding any risks and mitigations highlighted.
Ask questions if unsure and always check understanding if unsure.
Have the ability to work as part of a team or lone working
Have good time management skills
Have the ability to conduct themselves appropriately on site, as a representative of the company.
Essential
Able to travel. You will be required to work across different Client sites.
Proven and relevant work experience, with references required.
Ability to work at height / confined spaces. Training will be provided if needed.
Clean Driving Licence. You may be required to drive a Company Van.
Flexibility to work Overtime / Weekends when required
Happy to work either indoors or outdoors, dependant on the project.
Required to wear protective clothing and masks (PPE)
Desirable
TICA Skill Card
IPAF Operator Training MEWP - Mobile Vertical (3a) & Mobile Boom (3b)
Confined Spaces Training
PASMA – Certificate of Competence for Tower use