Setter Operator (Sliding Head)
| Dyddiad hysbysebu: | 27 Tachwedd 2025 |
|---|---|
| Cyflog: | £15 i £17 yr awr |
| Gwybodaeth ychwanegol am y cyflog: | Overtime available plus pension, early Friday finish and other great benefits |
| Oriau: | Llawn Amser |
| Dyddiad cau: | 06 Rhagfyr 2025 |
| Lleoliad: | Doncaster Finningley Airport, Doncaster |
| Gweithio o bell: | Ar y safle yn unig |
| Cwmni: | Ash Consulting |
| Math o swydd: | Parhaol |
| Cyfeirnod swydd: | KP-8194 |
Crynodeb
CNC Setter/Operator (Sliding Head)
Ash Consulting are working on behalf of our prestigious and world-known manufacturing client based in Doncaster.
In this full time permanent role the CNC setter/operator will set and where necessary, operate a range of CNC turning centres, and CNC sliding head lathes to produce parts.
KEY DUTIES:
The setting of machines, adhering to Company procedures; ensuring the efficient use of resources.
To organise all necessary ‘pre-setting’ activities; using all personnel and equipment made available to you effectively.
Provision of a quality set up, adopting a ‘right first time on time’ approach, ensuring the required level of quality and efficiency throughout the production run.
Take a responsible attitude to health, safety, and the environment in relation to your own role, and that of your colleagues. Report any related issues to your supervisor, or EHS representative.
KEY DUTIES AND ACTIVITIES:
Load program, set machine and present a first off for inspection. Report any production related issues to the line supervisor.
Maintain the efficient operation of the machinery.
Ensure that there is sufficient stock of raw material prepared for the machine to manufacture the components as per the works order / production schedule.
Make a positive contribution in maintaining a workplace that is healthy, safe, tidy, and well organised; participation in ‘5S’ activities is mandatory and part of the role.
Ensure that all equipment is used correctly and returned to its designated storage area on the completion of a job, in a clean and sound condition.
Carry out any other tasks, that are reasonable and within your capability; as requested by your supervisor, or line manager.
Attend and participate in any relevant training courses, toolbox talks or briefings that the Company consider to be of benefit to you, or the department.
CNC programmer/setter will have previous experience in setting CNC turning centres and CNC lathes, programs will be mainly using Fanuc controlled systems. Have the ability to interpret engineering drawings to determine the best method.
This is a permanent role, 37.5 hrs per week. This is a standard day shift role Monday to Friday with a lunch time early Friday finish
WHATS ON OFFER
In return on offer is a competitive salary as well enhanced overtime rate, early finish on Fridays, holiday – 25 days + Bank Holidays, company pension plan, occupational sick pay scheme. Rate of pay £15 to £17 per hour (+ shift allowance) dependent on experience and qualifications
HOW TO APPLY
If you feel you have the necessary skills and experience to be successful in this role, click on "APPLY" today, forwarding an up-to-date copy of your CV for consideration in the first instance.
Ash Consulting acts as an employment agency for permanent and fixed term contract recruitment and as an employment business for the supply of temporary workers.
Candidates to be invited for interview will be contacted within 7 days
Ash Consulting are working on behalf of our prestigious and world-known manufacturing client based in Doncaster.
In this full time permanent role the CNC setter/operator will set and where necessary, operate a range of CNC turning centres, and CNC sliding head lathes to produce parts.
KEY DUTIES:
The setting of machines, adhering to Company procedures; ensuring the efficient use of resources.
To organise all necessary ‘pre-setting’ activities; using all personnel and equipment made available to you effectively.
Provision of a quality set up, adopting a ‘right first time on time’ approach, ensuring the required level of quality and efficiency throughout the production run.
Take a responsible attitude to health, safety, and the environment in relation to your own role, and that of your colleagues. Report any related issues to your supervisor, or EHS representative.
KEY DUTIES AND ACTIVITIES:
Load program, set machine and present a first off for inspection. Report any production related issues to the line supervisor.
Maintain the efficient operation of the machinery.
Ensure that there is sufficient stock of raw material prepared for the machine to manufacture the components as per the works order / production schedule.
Make a positive contribution in maintaining a workplace that is healthy, safe, tidy, and well organised; participation in ‘5S’ activities is mandatory and part of the role.
Ensure that all equipment is used correctly and returned to its designated storage area on the completion of a job, in a clean and sound condition.
Carry out any other tasks, that are reasonable and within your capability; as requested by your supervisor, or line manager.
Attend and participate in any relevant training courses, toolbox talks or briefings that the Company consider to be of benefit to you, or the department.
CNC programmer/setter will have previous experience in setting CNC turning centres and CNC lathes, programs will be mainly using Fanuc controlled systems. Have the ability to interpret engineering drawings to determine the best method.
This is a permanent role, 37.5 hrs per week. This is a standard day shift role Monday to Friday with a lunch time early Friday finish
WHATS ON OFFER
In return on offer is a competitive salary as well enhanced overtime rate, early finish on Fridays, holiday – 25 days + Bank Holidays, company pension plan, occupational sick pay scheme. Rate of pay £15 to £17 per hour (+ shift allowance) dependent on experience and qualifications
HOW TO APPLY
If you feel you have the necessary skills and experience to be successful in this role, click on "APPLY" today, forwarding an up-to-date copy of your CV for consideration in the first instance.
Ash Consulting acts as an employment agency for permanent and fixed term contract recruitment and as an employment business for the supply of temporary workers.
Candidates to be invited for interview will be contacted within 7 days